Skip to content
View of BS260TGV BandSaw

GMC 9" x 14" Metal Band Saw with Variable Speed BS-260TGV

by GMC Machine Tools
Save 9%
$5,850.00
$5,350.00
Notify me when back in stock
Free Shipping to the Lower 48!
Authorized GMC Machine Tools Dealer
Manufacturer's Warranty on All GMC Products
Proudly Tradesman Owned and Operated
No State Sales Tax Outside of PA. It's On Us!
  • Taiwan Saw, ISO 9001 certified
  • Max. capacity of 9” OD
  • Variable blade speeds from 66 to 280 fpm with a dial to set up speeds
  • Gear-driven transmission makes the machine more reliable & rigid
  • Mitering head swivels up to 60° to the right
  • Two operation modes: manual cut and cycle cut
  • Powerful flood coolant system
  • Cast iron mitering head and bow without vibrations
  • 8 precision ball bearing blade guides make a clean, high-quality cut
  • Patented blade tensioning gauge makes it simple to get the tension right
  • Safety device for saw blade breakage
  • Power source: 220V/1 phase
  • One year industrial warranty for parts
Specification Value
Cutting Capacity
Round @ 90° / 45° / 60° R 8.91” / 5.9” / 3.54”
Rectangular @ 90° / 45°R 10.59 x 4.33 / 7.87 x 4.92
Square @ 45° / 45°R / 60°R 8.66 x 5.7 x 3.34
Saw Blade & Speeds
Saw Blade Size 1” x 0.035” x 96.85”
Blade Speeds 66 - 280 FPM variable
Down Feed & Miter Cut
Power Down Feed Rate Variable
Dual Miter Cut Degree 0-60°R & 0-45°L
Motor & Weight
Blade Drive Motor 1-1/2 HP, 220V, Single Phase 15AMP
Machine Weight 750 LBS
Machine Dimensions
Machine Dimensions (LxWxH) 69” x 44” x 45”

 

DISCLAIMER

Any machine that has a voltage change, phase converter installed after purchase, or if you forget to add oil into the machine will immediately void warranty. Buyer is fully responsible for any replacement parts and labor repair cost.

 

 

  • Taiwan Saw, ISO 9001 certified
  • Max. capacity of 9” OD
  • Variable blade speeds from 66 to 280 fpm with a dial to set up speeds
  • Gear-driven transmission makes the machine more reliable & rigid
  • Mitering head swivels up to 60° to the right
  • Two operation modes: manual cut and cycle cut
  • Powerful flood coolant system
  • Cast iron mitering head and bow without vibrations
  • 8 precision ball bearing blade guides make a clean, high-quality cut
  • Patented blade tensioning gauge makes it simple to get the tension right
  • Safety device for saw blade breakage
  • Power source: 220V/1 phase
  • One year industrial warranty for parts
Specification Value
Cutting Capacity
Round @ 90° / 45° / 60° R 8.91” / 5.9” / 3.54”
Rectangular @ 90° / 45°R 10.59 x 4.33 / 7.87 x 4.92
Square @ 45° / 45°R / 60°R 8.66 x 5.7 x 3.34
Saw Blade & Speeds
Saw Blade Size 1” x 0.035” x 96.85”
Blade Speeds 66 - 280 FPM variable
Down Feed & Miter Cut
Power Down Feed Rate Variable
Dual Miter Cut Degree 0-60°R & 0-45°L
Motor & Weight
Blade Drive Motor 1-1/2 HP, 220V, Single Phase 15AMP
Machine Weight 750 LBS
Machine Dimensions
Machine Dimensions (LxWxH) 69” x 44” x 45”

 

DISCLAIMER

Any machine that has a voltage change, phase converter installed after purchase, or if you forget to add oil into the machine will immediately void warranty. Buyer is fully responsible for any replacement parts and labor repair cost.

 

 

This product is eligible for a lift gate! Instead of being delivered on a flatbed truck and needing equipment to unload it, this item is small enough to be delivered by LTL (Less than a truckload) freight. Because of this, it can be lowered to the ground via the lift gate on the truck, and you will only need to be able to move it once it is already on the ground. The fee for this service is 175$ for a residential delivery and 125$ for commercial deliveries.

All other shipping for GMC Machine Tools products remains free of charge. If you have any questions or concerns about this at all, please reach out to us! No concern of yours is too big or too small to call us. Call us @ (888) 884-9064 or email us @ support@machineauthority.com Thanks!

  • Taiwan Saw, ISO 9001 certified
  • Max. capacity of 9” OD
  • Variable blade speeds from 66 to 280 fpm with a dial to set up speeds
  • Gear-driven transmission makes the machine more reliable & rigid
  • Mitering head swivels up to 60° to the right
  • Two operation modes: manual cut and cycle cut
  • Powerful flood coolant system
  • Cast iron mitering head and bow without vibrations
  • 8 precision ball bearing blade guides make a clean, high-quality cut
  • Patented blade tensioning gauge makes it simple to get the tension right
  • Safety device for saw blade breakage
  • Power source: 220V/1 phase
  • One year industrial warranty for parts
Specification Value
Cutting Capacity
Round @ 90° / 45° / 60° R 8.91” / 5.9” / 3.54”
Rectangular @ 90° / 45°R 10.59 x 4.33 / 7.87 x 4.92
Square @ 45° / 45°R / 60°R 8.66 x 5.7 x 3.34
Saw Blade & Speeds
Saw Blade Size 1” x 0.035” x 96.85”
Blade Speeds 66 - 280 FPM variable
Down Feed & Miter Cut
Power Down Feed Rate Variable
Dual Miter Cut Degree 0-60°R & 0-45°L
Motor & Weight
Blade Drive Motor 1-1/2 HP, 220V, Single Phase 15AMP
Machine Weight 750 LBS
Machine Dimensions
Machine Dimensions (LxWxH) 69” x 44” x 45”

 

DISCLAIMER

Any machine that has a voltage change, phase converter installed after purchase, or if you forget to add oil into the machine will immediately void warranty. Buyer is fully responsible for any replacement parts and labor repair cost.

 

 

This product is eligible for a lift gate! Instead of being delivered on a flatbed truck and needing equipment to unload it, this item is small enough to be delivered by LTL (Less than a truckload) freight. Because of this, it can be lowered to the ground via the lift gate on the truck, and you will only need to be able to move it once it is already on the ground. The fee for this service is 175$ for a residential delivery and 125$ for commercial deliveries.

All other shipping for GMC Machine Tools products remains free of charge. If you have any questions or concerns about this at all, please reach out to us! No concern of yours is too big or too small to call us. Call us @ (888) 884-9064 or email us @ support@machineauthority.com Thanks!