GMC 51" x 60" Finish Pro | Wide Belt Sander Machine FP-5160T
These models are not currently in stock. Call in to check on lead times! Thank you!
- Made in Taiwan
- Computerized programmable thickness control
- Abrasive belt size: 51” x 60”
- 10” diameter heavy duty drum for perfect graining
- 5-1/8” wide opening for max. workpiece thickness 5”
- Motorized Table Lift with LED display
- Variable Speed Conveyor
- Conveyor Forward & Reverse
- Belt Safety Overtravel Switches
- Electronic Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to
- Re-adjust the tracking system when running extremely out of parallel belts
- 4-Jackscrew Table Support
- Double Infeed & Outfeed Pinch Rolls with protective guards
- Conveyor Belt Tracking System
- Safety System with Disc Brake. Air operated disc brakes to stop sanding head in
- 3-5 seconds in the even of loss of air pressure or activation of any emergency stop device
- Table Height Digital Readout
- Load Meter indicates percentage of full motor loads
- Belt change door electrically interlocked for safety purpose
- Air tensioning of belt for accurate tensioning & compensation of belt stretch
- Quick release sanding head support for fast belt change
- Dust collection hood with 6” outlet is located adjacent to abrasive head in sanding area
- Emergency stops from almost any point
- Noise level bellows 82 dba
- Operation manual, control tags, danger signs, and warning labels in English on machine
- 208/230V, 3-Phase ( 440/460V is available )
- One year Industrial Warranty for parts.
Note:
- Prices are for 208-230 VOLTS
- Total amps 120 @ 230/3/60
- COMPRESSED AIR REQUIRED: 2 CFM @ 90 PSI
CAUTION: If fire hazardous materials, such as aluminum, titanium, magnesium, etc., are to be processed, a dust collection system that conforms to National Fire Protection Association (NFPA) should be used.
DISCLAIMER
Please note this machine is incompatible with the use of a rotary phase converter. Any attempt to purchase, install, or employ one, whether carried out by you or a professional service company, will automatically void the warranty. It is crucial to understand that any such actions are entirely the responsibility of the buyer.
This disclaimer is intended to clearly convey that the utilization of a rotary phase converter to power or operate this machine is not supported.
Specifications and Manual
| Specification | FP‑5160T |
|---|---|
| Dimensions & Passline | |
| Max. Part Width | 51″ |
| Abrasive Belt Size | 51″ × 60″ |
| Contact Roller Size | 8″ Dia. |
| Passline Height | 31″ – 37″ |
| Capacity | |
| Thickness Capacity | 20 Ga to 5‑1/8″ max. |
| Conveyor & Dust Collection | |
| Conveyor Drive Speeds | 15–56 FPM |
| Infeed Conveyor Length | 20″ |
| Dust Collector Capacity | 2,800 CFM |
| Dust Hood Outlet | 6″ Dia. × 2 outlets |
| Motors & Power | |
| Main Motor | 30 HP, 230 V / 460 V, 3‑Ph |
| Conveyor Motor | 2 HP, 230 V / 460 V, 3‑Ph |
| Table Lifting Motor | 2 HP, 230 V / 460 V, 3‑Ph |
| Amperage Draw | 120 A (220 V), 60 A (440 V) |
| Weight | |
| Machine Weight (approx.) | 4,190 lbs |
| Dimensions (L × W × H) | |
| Machine Dimensions | 82″ × 68″ × 73″ |
| Shipping Dimensions | 84″ × 70″ × 75″ |
Optional Add-Ons
Call for Price
- This machine requires two sets Wet Dust Collectors #WDC-2100
- Model WDC-2100 Wet Dust Collector # WDC-2100, 5 HP, 2,100 CFM
- Heavy Duty Ducting Package # HDDP-5285
- Service Engineer for Start-Up and On-site Training # ST - $ POR
- Plus travel expenses
- Shipping (approx.) - $
NOTE: All prices in this quotation are plus tax, F.O.B. Factory. Prices and specifications are subject to change without notice.