Sharp Industries 12" x 58" Heavy Duty Knee Milling Machine V-1
There is a 6% surcharge on all Sharp products due to tariffs.
Feel free to call in to ensure product availability and lead times.
$43,300.00
Free Shipping to the Lower 48!
Authorized Sharp Industries Dealer
Manufacturer's Warranty on All Sharp Products
Proudly Tradesman Owned and Operated
No State Sales Tax Outside of PA. It's On Us!
This model is built for heavy cutting. The boxways on the vertical column and top of base allow extra support to the table under hard machining. The size of the saddle is extra wide to support the table to avoid over hang. The top of the saddle is coated with TURCITE-B for better retention of oil and wear resistant.
- 12 x 58 ins table, 16 x 40 ins travel
- Hardened and ground box ways
- #40 taper, 5 hp spindle motor
- Digital Variable Speed spindle
- Power feed table and saddle
- Motorized rapid knee for easy positioning
Specifications and Manual
| Specification | Inch | Metric |
|---|---|---|
| Table Size | 12 × 58 in. | 304.8 × 1,473.2 mm |
| T‑slots (No., Size, Pitch) | 3, 5/8, 2.5 in. | 3, 16, 63.5 mm |
| Table Travel: X Longitudinal | 40 in. | 1,016 mm |
| Table Travel: Y Cross | 16 in. | 406.4 mm |
| Quill Travel: Z Vertical | 5 in. | 127 mm |
| Knee Travel: Vertical | 16 in. | 406.4 mm |
| Ram Travel | 17.8 in. | 452.12 mm |
| Spindle Nose to Table Top | 2–18 in. | 50.8–457.2 mm |
| Head & Spindle | ||
| Spindle Nose Taper | NT‑40 | NT‑40 |
| Spindle Variable Speed Range | 70–4,000 rpm | 70–4,000 rpm |
| Spindle Motor (220V/440V) | 5 HP | 3.72 KW |
| Quill Feed (3 speeds) | 0.015, 0.003, 0.006 in./min. | 0.015, 0.076, 0.152 mm/min. |
| Quill Diameter | 4.12 in. | 104.64 mm |
| Head Swivel Angle | 360° | |
| Head Tilt Angle (L/R) | +/- 90° | |
| Head Tilt Angle (Up/Down) | +/- 45° | |
| General | ||
| Floor Area (W × D × H) | 9.8 × 6.25 × 8.33 ft | 2.98 × 1.90 × 2.53 m |
| Approximate Weight | 4,500 lbs. | 2,041.16 Kg |
| Power Consumption (220V) | 3 KVA / 8 amps | |
| Power Consumption (440V) | 3 KVA / 4 amps | |
Standard Equipment
- Power feed table and saddle
- Motorized rapid knee positioning
- Coolant System
- Front and Rear Rubber Way Cover
- Auto-lube System
- Rubber Way Cover at back of Saddle
- Halogen Worklight
Optional Add-Ons
Call for Price
- 440V Transformer
- Power Draw Bars
- “Align” Power Draw Bar w/Foot Pedal Control
- “Maxi Torque Rite” Power Draw Bar
- 6 in. Kurt Vise with Swivel Base
- Right Angle Milling Attachment w/ Arbor (#40)
- Riser blocks, 4 ins, 6 ins, 8 ins , sizes
- Drill Chuck & Drill Arbor
- Clamping Kit (52 pcs/steel racks
- Digital Readout System